Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Packs/Racks/Baskets

$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
$29.95
Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$129.95
The perfect quick-mount rear rack system attaches to road, cross, hybrid or touring bike seatstays. This one-size-fits-all front rack features an innovative top plate that adjusts to levels independent of the seatstay angle. Integrated QuickTrack system allows Topeak TrunkBags to slide and lock into place and release with a the push of a button. Innovative hook-and-loop-strap mounting system cinches down tight to keep the load stable and allow mounting on a wide range of bikes. - Attachments: Seatstays with hook-and-loop straps - Adjustment: Strut slots - Material: Aluminum / Engineering grade polymer / Nylon straps - Compatibility: Topeak MTX / RX TrunkBags - Max Load: 9kg / 20lb - Clamp for rear reflector, tail light mount - Size: 39.5 x 30 x 12cm / 15.6" x 11.8" x 4.7" - Weight: 870g / 1.92lb
$49.95
Get the most out of quick rides with a hip pack featuring quick, one-handed phone access and storage for essential tools or nutrition. - One-handed, behind the back access to a phone in a soft, structured pocket - Ride in comfort and descend with confidence with superior stability and breathable materials - Quickly access nutrition with side jersey pockets - Keep tools and accessories organized in dedicated internal pockets - Stay visible with a blinky-light attachment loop Technical specifications: - Dimensions: 8.66 x 2.36 x 5.91 in - Volume: 0.5 L - Weight: 0.5 lb - Material: Nylon
$69.95
Comfortable and versatile hip pack with water bottle storage, perfect for 1-3 hour rides. - One-handed, behind the back access to a phone in a soft, structured pocket - Carry up to two water bottles in the side pockets for longer rides - Side pockets collapse giving a streamlined fit for shorter rides when no water bottles are needed - Ride in comfort and descend with confidence with superior stability and breathable materials - Organize tools and clothing accessories in interior pockets - Quickly access nutrition with side jersey pockets - Stay visible with a blinky-light attachment loop Technical specifications - Dimensions: 10.24 x 3.54 x 6.3 in - Volume: 2L - Weight: 0.5 lb - Material: Nylon
$79.99 $80.00 On Sale
Whether it‚ a picnic in the park or an epic, multi-day ride in the mountains, we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-liter open pannier in rigid plastic, our Coolcave is perfect for carrying everyday essentials, purchases, or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable Isofix mountings allow for secure attachment on most bike racks. - 19 L cargo capacity. - KlickFix mounting system. - Made with 50% recycled plastic. - Cargo net included. - Compatible with Specialized/Fjällräven Cave Pack, Cave Pack Tote, and Cave Lid Pack.
$100.00
These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike
$100.00
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$89.99 $90.00 On Sale
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$50.00
The Roll Rack fits all Specialized Roll models, as well as most bikes with a 650b wheel size. The rack also features a maximum load capacity of 15kg, and it includes a steel bracket, hook plate, and corrosion-resistant hardware. - Fits all Specialized Roll models, as well as most bikes with a 650b wheel size. - Includes a steel bracket, hook plate, and corrosion-resistant hardware. - Maximum load capacity: 15kg
$79.99 $80.00 On Sale
Whether it’s a picnic in the park or an epic, multi-day ride in the mountains, we believe good storage equals good adventuring. Enter our versatile and tough Coolcave pannier. A 19-liter open pannier in rigid plastic, our Coolcave is perfect for carrying everyday essentials, purchases, or camping gear on bike commutes or trips in the countryside. Easy to clip on and off so you can take the pannier and its contents with you. Adjustable KlickFix mountings allow for secure attachment on most bike racks. Openings for gear straps and compatible with the Cave Lid Pack (art.no. 23230). Part of the Specialized/Fjällräven Exchange series for urban rides and bikepacking adventures. - 19L cargo capacity. - KlickFix mounting system. - Injection-molded plastic, made with 50% recycled plastic. - Self-standing design: two ridges at the bottom keep the container standing upright on even surfaces. - Dimensions: 400 x 345 x 200 mm - 10 kg max. cargo load. - Drainage hole at bottom can be opened by removing the rubber plug. Sealing the hole prevents small items from falling out and allows using the container to transport water. - Cargo net included.
$50.00
Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm
$50.00
Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams
$49.99
Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access
$68.00
The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches
$11.99
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
$19.99
Planet Bike's Big Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 80 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for safety.
$60.00
Blacktop bags feature clever attachments and subtle features. The Trunk bag mounts to nearly any rear rack top for storing essential gear for the ride. - Easy, durable rack mounting straps convert into carrying handles - Easy-access U-lock sleeve and covered rear stash pocket - Internal dividers allow for multiple configurations - Daisy-chain loops for attaching taillights and other gear - Approximate dimensions: 13.5 x 7 x 4.5"
$20.00 - $30.00
MSW's simple strap-mounted Brand New Bags come in three sizes so you can carry along your keys, phone, wallet or emergency repair kit--or whatever else you need to make your bike ride great. - Combination 600D polyester and 420D nylon outer with 210D Nylon lining - Simple strap and clip attachment - 3M reflective strip - Loop for clip-on lights - Small: 6.3 x 2.8 x 4.1" - Medium: 7.7 x 3.3 x 4.7" - Large: 7.5 x 3.9 x 5.3"
$14.95
Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs
$29.99
KLI:K Saddle Bag: The KLI:K’s Anthracite Cordura material is heard-wearing and good looking, while its inner mesh pocket keeps contents organized and protected, and a water-resistant zip and semi-auto lock puller keeps things dry and secure. Reflective logos and piping right round the edges help keep you visible after dark from both sides and the rear. The KLI:K features an ICS clip fitment, so it’s easy to attach and detach, along with other products compatible with fi’zi’:k’s Integrated Clip System. The KLI:K comes in two size options so you can choose how much you want to carry on your ride. - Cordura Shell with Integrated Clip System - Color: Anthracite - WP zip - Internal mesh pocket - Reflective logos and piping
$13.99 $19.99 30% Off
Banjo Brothers' Handlebar bag is a great way to add extra carrying capacity to any bike. It conveniently attaches to your bars or even under your saddle with its easy-to-use straps. The rigid liner prevents sagging and there's a reflective strip protecting a 2-way zipper.
$69.99
Axiom's Fresh-Mesh DLX Front Basket makes running errands on your bike a breeze. Boasting a tough steel frame and vinyl-coated steel mesh, this handy basket attaches to your handlebars with an easy-to-use quick-release mount and features a convenient carrying handle so you can take it with you. There's also a place to attach a headlight (sold separately).
$109.99
A highly functional expandable trunk bag with a thermal-lined main compartment. Optimized for use as an insulated lunch bag. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Washable reflective interior is ideal for carrying beverages/food MOUNTING SYSTEM - Lightweight, universal Velcro attachment system attaches to top of rack ADDED BENEFIT - Insulated main compartment is ideal for beverages/food and helps keep contents cool/warm - Side pockets expand to provide an additional 5.4L / 328 cu/in - Rear zippered pocket - External mini-pump straps - Ultra-visible 3-way 3M triangle logos - Carry handles for added convenience - Volume: 15.3 L / 932 cu in (expanded), 9.9 L / 604 cu in (not expanded) - Weight 575g / 1.27 lbs
$81.99
A highly functional trunk bag with a thermal-lined main compartment. Optimized for use as an insulated lunch bag. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Washable reflective interior is ideal for carry beverages/food. MOUNTING SYSTEM - Lightweight, universal Velcro attachment system attaches to top of rack ADDED BENEFIT - Insulated main compartment is ideal for beverages/food and helps keep contents cool/warm - Side mesh pockets - Rear zippered pocket - Carry handles for added convenience - Volume 9.0 L / 549 cu in - Weight 414g / 0.91 lbs
$36.00
Zipp's Speed Box 1.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 1.0 is a lightweight, easy-to-use alternative to traditional saddle bags.
$36.00
Zipp's Speed Box 2.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 2.0 is a lightweight, easy-to-use alternative to traditional saddle bags.
$36.00
Zipp's Speed Box 3.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachment, the Speed Box 3.0 is a lightweight, easy-to-use alternative to traditional saddle bags.
Page 1 of 11 Next page