Other

The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (40 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. Intended for bikes with an 40mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstays.

The Ursus EASY MASTER RT92 Adjustable rear-mount kickstand (w/ oval chainstay mount) is an alloy kickstand with the capacity to hold up to 55 lbs. URSUS EASY MASTER STAY RT92 comes with a mount that fits around an oval chainstay. It is ideal for bicycles that are not designed for center-mount kickstands and feature an oval chainstay. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike.  Features a tool-free adjustment button that lets you adjust the lean angle of your bicycle to your preference. The plastic foot attached to the kickstand is extremely strong and prevents the stand from slipping while in use. Weighs 350 grams.

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

- Protects high risk areas from rock chips, wear & scratches - Designed around road and gravel bike geometry - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Frame coverage ~60%. Includes toptube, full downtube, 4 stays, seat tube and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

Applications: - ESGE Rear Kickstands - Spring for side movement - Dampening of the stay - Fatigue test for spring mechanism - Expendable in 7.5mm steps Delivery: - Mounting hardware M5x20 / M6x20 (special size on request) - Plastic shoe black Material: - Aluminium die-cast GD-AlSi9Cu3 - Color Kickstand: powder coated black or metallic - silver - Plastic Kickstand Shoe with a large surface - Pin hardened steel, zinc-plated - Mounting screws stainless Specifications: - Strut length L1 315 - 380 mm every 7.5 mm (26"-29") - Support hole distance 18 mm - Weight 260 g - max. Load 18 kg

Applications: - ESGE Rear Kickstands - Spring for side movement - Dampening of the stay - Fatigue test for spring mechanism - Expendable in 7.5mm steps Delivery: - Mounting hardware M5x20 / M6x20 (special size on request) - Plastic shoe black Material: - Aluminium die-cast GD-AlSi9Cu3 - Color Kickstand: powder-coated black or metallic-silver - Plastic Kickstand Shoe with a large surface - Pin-hardened steel, zinc-plated - Mounting screws stainless Specifications: - Strut length L1 315 - 380 mm every 7.5 mm (26"-29") - Support hole distance 40 mm - Weight 275 g - max. Load 18 kg

Applications: - Center Kickstand - Push spring movement - Aluminium-die cast GD-AlSi9Cu3 Delivery: - incl. screw and washer - Optional: plate - Kickstand Shoe pair optional Material: - Powder-coated black/metallic silver - Pin steel hardened, galvanized - Screw M10x55 - Washer galvanized F6 Specifications: - Support 58x31x66 - Strut length L1 Modell S 290/26" - Strut length L1 Modell L 320/28" - max. Strut length 28" - Weight Modell L 542g - max. Load 25kg

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

• Designed for flat-sided tubes up to 23mm thick • Firm spring prevents movement while riding • Two bracket options to better fit small and large frames

Built for Si dropouts. A durable kickstand for Cannondale Si dropouts that is stylish and smartly equipped. Where it thrives: Leisurely rides, in town What it's built for: Durability Highlights: - Stylish and sleek - Light and strong alloy construction - Flat/post brake mount compatible

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)

Light-duty zip tie - 200mm length x 2.5mm - Bag of 100

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Wheels Manufacturing, Zip Ties, Jar of 600, Black

Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.

The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

2-bolt dropout mount, allowing a bike to be kept upright. - Made of durable aluminum - Compatible with: Crosstrail and Ariel A1 Disc bikes (up through MY14) - 2012-2014 Hardrock and Myka models - Crossroads and Expedition models (up to MY13) with 2-bolt dropout mount

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

We've always had a love-hate relationship with kickstands. When they work properly, they're great-a simple and easy way to leave your bike perched. But somehow, they always seem to fail when you least expect it, ending with a loud CRASH! and a scratched-up bike. So, we decided to develop a kickstand that does its job and does it well. And keep in mind, this kickstand was specifically designed for Rolls with 650b x 2.3" tires. - Specifically designed for Specialized Roll and its 650b x 2.3" tires. - Simple mounting takes the sting out of assembly. - Balances your bike flawlessly.

The Sitero Hook attaches to Sitero saddles, allowing bikes to be safely and securely hung in triathlon transition areas. - Replacement Hook for the Sitero

This bike kickstand was developed specifically for the Turbo Tero, allowing you to keep your bike upright on its own. If you need to complete your kit or replace a bike kickstand, this two-bolt dropout mount kickstand will do the job for you. Turbo Vado, Como, and Tero EQ come already equipped with a kickstand. - Durable aluminum construction. - Simple, two-bolt dropout mount allows for easy assembly. - Fits 40mm adapter plates. - Length: 362mm

Stay Kit for Bluemels 26"/28" Fenders includes 4 V-Stays with ASR Safety Release for Front + Eyebolt and Nut Set. Made in Germany. 11897-Set for Bluemels 26"/28" with Black Stays & Hardware (for 11805, 11806, 11807, 11811, 11815, 11819 and 11823) 11898-Set for Bluemels 26"/28" with Silver Stays & Hardware (for 11808, 11812, 11816, 11820 and 11824)

Cannondale Headshok Adaptor for the SKS Shockboard Fender

This eyebolt and nut set for fender-mounting contains 8 stainless eyebolts, 8 stainless nuts, and 8 plastic stay endcaps. This hardware set is used for mounting Chromoplastic Longboards, Bluemels, and Commuter II Fenders.

Replacement SKS Rubber Straps for RacebladePro and S-Board

Stay Kit for Bluemels STYLE Fenders includes 4 black powder-coated U-Stays + ESC V-Adapter Strut Mount Set (11892). Made in Germany. 11905-Set for Bluemels STYLE 46mm Width Profile (item 11832) 11909-Set for Bluemels STYLE 56mm Width Profile (item 11835) 11913-Set for Bluemels STYLE 65mm Width Profile (item 11838) 11915-Set for Bluemels STYLE 75mm Width Profile (item 11841)

Most riders should protect the lowers and crowns of their Road & Gravel forks. Fork protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the fork. RideWrap protection kits are high-quality polyurethane films that are applied to the fork to protect lowers and crowns from scratches, rock chips, and/or scuffs caused by trail debris, rocks, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around mountain bike fork geometry - The Covered Fork Kit includes protection for crowns, lowers, and extra pieces to provide approximately 60% fork coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet