Racks

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - 800g - 55lb weight capacity

- This one size fits all tubular aluminum rear rack is designed for Fat bikes with disc brakes - Adjustable rack legs fit most 24" & 26" Fat bikes - Integrated side bar provides a lower pannier attachment for more cargo on top of the rack - The MTX 2.0 QuickTrack plate is compatible with any Topeak MTX trunk bag, MTX rear basket, and most other rack packs and panniers on the market - Not compatible with asymmetric rear stay design Fat bike frames - Includes extra-long mounting bracket and rear light mount - Max weight 55lbs - 16.9 x 13.4 x 11.4" - 2.79lbs

A lighter duty version for MTB and commuter use. QR mechanism is secure and easy to use. 7 kg (15 lb) carrying capacity. Compatible with all MTX TrunkBags. Includes hidden storage tray, rubber bungee and safety reflector. - Clamp: Fits 25.4/31.8 mm (shims Incl.) - Bag Compatibility: MTX TurnkBags - Material: Aluminum beam / Plastic cargo deck - Max Weight Capacity: 7 Kilograms - Size: 51 x 12.5 x 9 cm / 20.1” x 4.9” x 3.5” - Weight: 688 grams

- Great rack for long distance touring with side bar for additional strength and stiffness - Compatible with all MTX 1.0 and 2.0 bags - T6061 T6 10mm hollow tube alloy construction - Disc mounts allow for mounting to bicycles with disc brakes - 739g - 55lb weight capacity

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material

The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).

Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.

Turn almost any bike into a cargo hauling machine with our popular Eco Rack. Its classic good looks and ease of installation make this rack a great choice for carrying more and going farther.

Our top-of-the-line rear rack. The K.O.K.O. rack’s elegant and classic styling make it the perfect choice for touring, commuting or for running errands around town. Easy installation and sturdy construction makes carrying the load a breeze.

Disc brake compatible rear rack. We named the Versa Rack for the fact that it’s versatile enough to fit 26”, 650b, 700c, and 29” bikes and fit over disc brakes with ease. The upper stays and lower mounts have a great range of adjustability for easy installation. Make hauling gear effortless with this robust yet simple rack.

Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs  - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty

You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)

You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)

The ultimate bike rack! The Ortlieb Rack Three offers you the right solution, whether you're on your way to work, the grocery store, or around the world. One unique advantage of this all-purpose bike rack is its compatibility with all Ortlieb attachment systems. Outfitted with convenient mounting elements for the QL3 and QL3.1 systems, the Rack Three allows you to attach all Ortlieb bags directly to your bike without any other modifications. If you want to use the Rack Three exclusively for your QL2.1/2/1 bags, you can easily remove the attachment elements for the QL3.1/QL3 and thereby create even more space for your panniers. The Rack Three's double-rail design allows you to attach all bike bags with a QL2.1, QL2 or QL1 system to a top level or a lower level. Selecting the lower level gives you the option of simultaneously attaching a bike basket or a Trunk-Bag to the top of your bike rack and expanding your overall stowage space. Rack Three is suitable for bicycles with wheel sizes of 26" and 28". - City and touring aluminum rack with two mounting levels - For wheel size 26"/28" (1 size) * Width of support surface 120 mm - Compatible with all Ortlieb mounting elements (QL1, 2, 2.1, 3 or 3.1 system) - With three integrated QL3/QL3.1 mounting elements on each side - Further mounting components are not required for QL3/QL3.1 bags - Suitable for direct mounting of QL3/QL3.1 products (e.g Back-Roller Urban, Single-Bag, Office-Bag, Downtown Two, Vario, City-Biker, Commuter-Bag) - QL3/QL3.1 lock heads can be easily removed for fixing panniers with QL1, QL2 or QL2.1 system; dummy plugs for borings included - Second mounting level for simultaneous use of pannies on sides and basket or Trunk-Bag on top - Mounting for optional rear light (not included) - Maximum capacity: 30 kg/66 lbs.

Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs. - Provides 3-pack mounts on any thru-axle fork - Axle Pack is rated to 10kg per pair - Four mounting points you can also choose to run your gear higher or lower depending on your needs

Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - Fits up to 29 x 3-inch tires, with room for fenders. - Front or rear mountable. - Works with all dropper posts. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability, and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55lbs when eyelet mounted. - For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black. - 960g including all hardware and extenders. - Made in Taiwan. - Lifetime warranty!

The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that’s what you’re into. Tested and trusted in the most extreme environments on earth (we’re still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn’t made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2? (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty

When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes. - Fits bikes with disc brakes: offset with integrated spacer - W-bend stays keep pannier hooks in place - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm

Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.

All-alloy bike rack securely mounts to bike to hold up to 40 lb. Features - Secure: Triangulated design holds cargo - Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible - Construction: Lightweight aluminum with stainless steel hardware - Weight: 1.53 lbs / 694 grams - Max Weight: 40 lb / 18 kg

This versatile rack has a 60 lb. weight limit and is ideal for connecting the Burley Dash® RM child bike seat. When you aren't using the bike seat, the Burley Rear Rack can accommodate panniers.