Your Search: "stumpjumper evo"

The Stumpjumper Alloy brings all of the new, lust-worthy features of the Stumpjumper—like new suspension kinematics and geometry—into a full-alloy package that's both lightweight and extremely durable. Top it off with a no-fuss SRAM SX 12-speed groupset and you have the perfect ride for your next trail adventure. TRAIL-TAMING TRAVEL All the travel in the world is useless without the proper kinematics, which is why we kept it at the forefront of the new Stumpjumper design. With the learnings from the suspension design on the Enduro, and over 1,000 hours of field and suspension lab development, we've greatly improved the pedaling performance, all while creating the capable, efficient, lively feelings that you long for. We increased anti-squat, so the suspension better-resists pedal bob, and then, we further-improved bump performance on square-edge hits. Bottom line? The all-new Stumpjumper descends with complete control yet climbs with ease. PROGRESSIVE GEOMETRY The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. Long, low, slack, a short offset fork, a steeper seat tube angle—they're all the talk of the town because they make your ride better. With Flip Chip adjustability you’re able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose.

The S-Works Stumpjumper EVO is much more than just a trail bike; it’s a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO—get rowdy. This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily. - What do you get when you pair a 29-inch front wheel with a 27.5-inch rear wheel? The S-Works Stumpjumper EVO Frameset, that’s what. With all of the traction and handling benefits of a 29er, but with a smaller, more maneuverable rear wheel, this mullet setup suits a more jibby, playful style. It’s right at home at the bike park, and is a total blast to cut loose with on the trail. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight. - We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.

The S-Works Stumpjumper EVO is much more than just a trail bike; it's a shred-sled built to full-send down the gnarliest trails. Featuring an all-new design, with an adjustable head tube angle, 150mm of performance tuned travel, and the adaptability of S-Sizing, this thing is an absolute ripper. The S-Works Stumpjumper EVO - get rowdy. This S-Works Stumpjumper EVO Frame is the perfect canvas to imagine your ultimate ride. Build your totally custom dream bike, make it a reality, and shred happily. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits rail-sharp cornering and balanced front and rear stiffness at the lightest-possible weight. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT Bladder, giving you an extra 22oz of water storage, the same size as a small water bottle, hidden in your downtube.

The Stumpjumper EVO is a testament to full-gas trail performance. With an all-new design, from its S-Sizing geometry with an adjustable head tube angle, to its 150mm of shred-ready travel, this thing is a full-on ripper. And the Stumpjumper EVO Frameset is the perfect starting point to build your own version of the ultimate trail bike. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits - rail-sharp cornering and balanced front and rear stiffness - at the lightest-possible weight. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle - these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - We introduced the SWATG door on the Stumpjumper in 2016, adding room IN your frame for those 'oh sh**t' necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWATG Bladder, giving you an extra 22oz of water storage - the same size as a small water bottle - hidden in your downtube.

When we say "The Ultimate Trail Bike," we mean it—the all-new Stumpjumper is everything you could ever ask for in a trail-ripping steed. Want a bike that climbs with ease? The Stumpjumper delivers, thanks to a ground-up suspension redesign and lightest-in-class frame weight. How about something that's ready to shred when the trail turns downhill? That suspension re-design - paired with new Trail Geometry and the Rider-First Engineered frame’s perfect blend of stiffness and light weight - turns the Stumpjumper into an absolute monster descending. Point it where you want to go and let the party begin. The S-Works Stumpjumper frame is the perfect starting point for you to envision your own interpretation of the Ultimate Trail Bike. Start with our supremely light, incredibly strong, FACT 11m carbon frame. Then dress it to suit your needs, whether those needs be singletrack soul surfing or death-grip mayhem. - THE TRAIL BENCHMARK—When we set out to design the all-new Stumpjumper, we pursued some hefty goals. It had to excel on any kind of trail, for every style of rider. To achieve that, we went after serious weight reduction without sacrificing durability, a stiff, responsive chassis that still rides light and lively, geometry that improves everyone’s riding, and the best suspension kinematics we know how to design. Turns out, you can have your cake and eat it too with the new Stumpjumper. - THE SWEETEST 130MM OF TRAVEL YOU’LL EVER RIDE—We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast, handles like a dream everywhere, and climbs like it has a motor. - PROGRESSIVE GEOMETRY—The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It’s long, low and slack, with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable, more carvealicious, more comfortable climbing, more better everywhere. With FlipChip adjustability you’re able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. - RIDER-FIRST ENGINEERED—Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight, And by light, we mean real light: 2,250 grams (S-Works, S-3 size, with rear shock). SWAT—We introduced the SWAT door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

When we say "The Ultimate Trail Bike," we mean it'the all-new Stumpjumper is everything you could ever ask for in a trail-ripping steed. Want a bike that climbs with ease? The Stumpjumper delivers, thanks to a ground-up suspension redesign and lightest-in-class frame weight. How about something that's ready to shred when the trail turns downhill? That suspension re-design - paired with new Trail Geometry and the Rider-First Engineered frame's perfect blend of stiffness and light weight - turns the Stumpjumper into an absolute monster descending. Point it where you want to go and let the party begin. - THE TRAIL BENCHMARK - When we set out to design the all-new Stumpjumper, we pursued some hefty goals. It had to excel on any kind of trail, for every style of rider. To achieve that, we went after serious weight reduction without sacrificing durability, a stiff, responsive chassis that still rides light and lively, geometry that improves everyone's riding, and the best suspension kinematics we know how to design. Turns out, you can have your cake and eat it too with the new Stumpjumper. - THE SWEETEST 130MM OF TRAVEL YOU'LL EVER RIDE - We massaged the kinematics of the Stumpjumper suspension to bring out the very best all-round performance possible in a 130mm package. Countless hours of suspension lab development and field testing created a refined mid-travel ripper that eats big terrain like a gravity fed beast, handles like a dream everywhere, and climbs like it has a motor. - PROGRESSIVE GEOMETRY - The S-Sizing geometry of the new Stumpjumper hits the progressive sweet spot. It's long, low and slack, with a short offset fork and a steeper seat tube angle. These numbers combine to make your ride more stable, more carvealicious, more comfortable climbing, more better everywhere. With FlipChip adjustability you're able to further fine-tune your fit, ensuring that your new Stumpjumper performs flawlessly on whatever terrain you choose. - RIDER-FIRST ENGINEERED - Rider-First Engineered frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits - rail-sharp cornering and balanced front and rear stiffness - at the lightest-possible weight, And by light, we mean real light: 2,250 grams (S-Works, S-3 size, with rear shock).

This thing called 'gravel riding' is still evolving, still being defined. What's next? Hop on the new Diverge Expert EVO and you tell us. It's designed to get aggressive, to push the boundaries of what we thought was possible on a gravel bike. Designed for flat bars and with geometry even more progressive then the new drop-bar Diverge, you better hang onto your flannel. We've significantly increased the reach, slackened the head tube and lowered the bottom bracket, to put you 'in' the bike for a super planted feeling. From sending technical singletrack to ripping flowing fire road descents, if you're looking for a partner to take your gravel riding to new levels, nothing's faster, more fun, or rowdier than the Diverge EVO. - Our Premium E5 Aluminum frame provides a stiff, light, and durable platform. When mated to our full carbon FACT fork, the Diverge EVO becomes a light, lively and versatile bike ready to tackle the most technical gravel and dirt as aggressively as you could wish. - Speed, control, and confidence—Future Shock 1.5 is ideal technology for the gravel rider. With 20mm of axial compliance, Future Shock 1.5 is progressively tuned specifically for gravel riding. This keeps you confident and in control, able to keep the power down and stay off the brakes over rough dirt roads and in thick loose gravel, all while keeping your hands, arms, and neck fresh. - With the Diverge EVO, we took our new progressive gravel geometry to new levels. We’ve lengthened the frame 30mm over a drop bar Diverge (Size Medium), lowered the bottom bracket, and slackened the head tube. This gives the Diverge EVO more confidence over technical terrain while keeping the cockpit comfortable with flat bars. It also allows for a short stem to make all that stability feel nimble and quick at the bars.

Let's get something clear, the Stumpjumper EVO Alloy isn't a "normal" trail bike. It's built to get gnarly, plain and simple. Featuring the same all-new design as its carbon brethren—including an adjustable head tube angle, 150mm of performance tuned travel, the adaptability of S-Sizing, and SWAT™ Door integration—in a lightweight yet tough M5 Alloy chassis, you're going to be able to bomb down trails that you thought you couldn't touch without a full-blown DH rig. - All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we've not only improved the pedaling performance of the Stumpjumper, but we've made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs. - The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front. - Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you're a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you'll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight. - We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those "oh sh**t" necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Romin EVO Saddle with Mirror is the future. We developed Mirror technology by 3D printing from liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 16,000 struts and 7,799 nodes, each of which can be tuned individually. And when you combine this technology with our extremely lightweight S-Works Romin EVO saddle, with its flex-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position. - Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

Great for families, double dates, or bringing your entire bike quiver, the HoldUp EVO +2 turns the 2" HoldUp EVO into a four-bike hauler. It's versatile enough to handle most bikes, from BMX to fat tire bikes. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. The whole unit can still tilt down and out of the way with bikes loaded, for easy rear-of-vehicle access, and the empty trays fold up and out of the way when not in use. Included SKS locks for each bike give you peace of mind. - Attaches to the 2" HoldUp EVO to carry two additional bikes - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Trays easily adjust to reduce bike-to-bike interference - Tilts down with bikes loaded for rear-of-vehicle access - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - ?Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Compatible only with 2" version of HoldUp EVO & HoldUp Product Specs: - Weight: 36.44 lbs. - Dimensions: L 27.00 in x W 42.00 in x H 8.00 in - Limited Lifetime Warranty

SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

- ADAPTIVE: Carbon Digital Light SynthesisTM 3D printing technology, offering seamlessly engineered zonal cushioning - VERSUS EVO: full channel design for pressure relief on soft tissue area - A combination of a high module full carbon shell and a carbon rail for ultimate stiffness and lightness - MOEBIUS RAIL: (7 x 10mm) patented closed-loop design for a balanced weight distribution - Easy to clean - Saddle Weight: 147g

The FSA SL-K carbon tandem cranks feature an asymmetrical modular compact 2 x 11-speed spider, 30mm spindle, and tons of adjustability. - Hollow carbon arms with UD carbon finish - Asymmetrical 110 A.B.S BCD achieves 4 chainlines (44,47,50,53) - English BB included - 104 BCD timing spider - 653 grams - Number of Chainrings: Single - Crank Intended Use: Tandem - Pedal Spindle: 9/16" - Rings: 38 - Spindle Interface Type: 392 EVO - BB Included: English

Innovative kayak carrier that is safe, stylish, easy to use, and integrates seamlessly with Thule roof rack systems. Features - Quickly raise or fold when not in use using the convenient front release handle - Easily manage load straps while strapping down the kayak using the integrated StrapCatch - Kayaks are protected during transit due to the durable and soft rubber padding - Theft resistant design keeps carrier securely attached to load bars (locks included) - Easy to install directly into the Thule WingBar Evo or AeroBlade T-track, or around Thule SquareBar via the integrated, tool-free mounting hardware (SquareBar requires an adapter) Technical specifications - Load capacity: 75 lb - Dimensions: 18 x 8 x 17.5 in - Weight: 15.2 lb - Rubber cover for strap buckle - Lockable - One Key System compatible Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar (Adapter/s required: Thule SquareBar Adapter 4-pack) - ProBar - Xsporter Pro

The Romin EVO Pro with Mirror starts with our Body Geometry methodology and combines this with our game-changing Mirror saddle technology to create an unmatched combination of performance and comfort. The saddle is designed for riders that prefer an agressive, performance inspired position that still protects soft tissue and blood flow. The result? 26% less pressure, right where it counts. PERFORMANCE MEETS COMFORT: The new Romin EVO Pro with Mirror saddle uses the exact same 3D printed pad as the S-Works Romin EVO Pro with Mirror but now comes with a nylon and reclaimed carbon fiber shell and hollow Ti rails. Our Romin EVO has been a favorite for our professional athletes and racers everywhere season after season. Its traditional long shape is designed to relieve pressure in aggressive, race-inspired positions while allowing the rider to slide backward and forward on the saddle to provide the ideal position for tempo climbing or maximum wattage efforts. Now with Mirror technology, the saddle reduces pressure by up to 26% compared to traditional foam saddles, validated with extensive high-resolution pressure mapping studies. It uses a 3D printed matrix with 22,200 struts and 10,700 nodes and features a unique concave shell to deliver our thickest Mirror pad yet. To ensure your fit is dialed, it comes in two widths: 155mm and 143mm. BODY GEOMETRY AND MIRROR: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pain, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don’t just promise to solve these issues for men and women — we’ve proved they do. Unlike traditional single-density foam, Mirror technology allows for infinite density tuning with a single material. But any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retül data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. DURABILITY AND SUSTAINABILITY: By using reclaimed carbon fiber in the shell, we’re keeping scrap carbon fiber out of landfills while creating a light and durable saddle. Add to this hollow Ti rails, and you’ve got a saddle light enough for performance road and XC riding - just 243 grams in a 143 mm width — and tough enough for gravel and trail riding. - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology pad features 22,200 struts and 10,700 nodes, all individually tuned. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Size 143mm / Weight: 239g - Size 155mm / Weight: 245g

Continued development of our popular crankset has led to the EVO Edition, a benchmark for aluminum MTB cranks. The latest FEA analysis tools, rigorous lab testing, and extensive field testing mean the EVO crankset is both lighter and stiffer than the previous model. Now featuring a self-extracting axle/arm interface, simplifying fitting and removal. And all proudly designed, tested, and manufactured in Barnoldswick, UK. - 15% lighter and stiffer than the previous model - Now featuring a self-extracting axle-to-arm interface, simplifying fitting and removal - Forged and CNC machined 7075 series aluminum alloy crank arms - Unique expanding spline/arm interface - Versatile Spline mount for chainring/spider - 30mm oversized axle - Weight: 641g (arms, axle, and 34 tooth spiderless ring)

The Sigma ROX 11.1 EVO GPS bike computer is your perfect training partner for indoor and outdoor bike training. Its numerous functions support and guide bikers reliably so that they can have even greater enjoyment of the freedom and delight bicycling provides. The 55-g bike computer wins over customers with its compact, modern design and simple, user-friendly operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. Navigation information and ride data can be read very easily on the 1.77-inch transmissive color display thanks to its outstanding contrast. Use the free SIGMA RIDE app to track your current ride data and analyze them at any time. - The bike computer's 150 functions support and guide athletes during training and leisure, delivering all data reliably and in real time - The scope of function includes speed and distance tracking with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and smart trainers - The integrated Crash Alert feature uses an app to inform your emergency contacts if you fall off your bike - Smart notifications inform the rider of incoming calls and messages during the ride - Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO, and bikers can also create their own sport profile and use the ROX 11.1 on different bikes - Six different training views with one to six data fields can be highlighted in color with the SIGMA RIDE app, with a configuration tailored entirely individually - Up to 100 hours of riding time can be stored on the ROX 11.1 EVO; ride data can thus be called up quickly at any time on the ROX 11.1 EVO, the SIGMA RIDE app or, after training, on your PC or MAC in the SIGMA DATA CENTER - Navigation information and ride data can be read very easily on the 1.77-inch transmissive color display thanks to its outstanding contrast; the display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor

Easy-to-install foot for Thule Evo roof racks. For vehicles with raised railings. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with raised railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle. - Rubber lining protects the surface of the raised railings and ensures a perfect fit. - Secures to the vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer’s Guide to find out which roof rack fits your car

Easy-to-install foot for Thule Evo roof racks, for vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles without pre-existing roof rack attachment points - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Quick assembly and install with click-in mounting brackets. No additional tools required - Securely holds the rack to the vehicle thanks to patented clamping technology - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car

Easy-to-install foot for Thule Evo roof racks, for vehicles with flush railings. Features - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with flush railings - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Secures to vehicle with Thule One-Key locks (sold separately) - Check the Thule Buyer's Guide to find out which roof rack fits your car Technical specifications - Maximum load: 165-pound. Please also check the maximum roof load capacity of your vehicle - One Key System compatible Fits: - Thule WingBar Evo - Thule AeroBlade - Thule SquareBar - Thule ProBar

Easy-to-install foot for Thule Evo roof racks, for vehicles with integrated fixed points, T-profile, or custom install rack attachment points. - Easy-to-install roof rack feet - For Thule Evo roof racks systems - For vehicles with integrated fixed points Features: - Load carrier feet for Thule Evo roof rack system - Foot installs easily onto vehicles with integrated fixed points, T-profile, or custom install rack attachment points - Secures to vehicle with Thule One-Key locks (sold separately) - Ergonomic torque limiter key indicates when the rack is safely and properly secured to your vehicle - Check the Thule Buyer's Guide to find out which roof rack fits your car - Add Thule Fixpoint Kit Cover (sold separately) for a quick rack mounting solution - Maximum load: 220 lb. Please also check the maximum roof load capacity of your vehicle.

The Vision Track Crank features oversized solid forged aero arms optimized for rigidity and a deep-tooth 49T chainring, as well as an ultra-stiff 30mm spindle. The 386EVO spindle design assures compatibility with all major bottom bracket shells. - Solid forged alloy 6061 - Forged 7050 30mm spindle - Polished anodized black with laser graphics - Number of Chainrings: Single - Chainline/Hub Compatibility: 120 Hubs - Crank Intended Use: Track - Pedal Spindle: 9/16" - Rings: 49 - Spindle Interface Type: 386 EVO - Drivetrain Speeds: Single Speed 1/2" x 1/8" - Chainring BCD: 144 - BB Included: No

The Sigma ROX 11.1 EVO GPS bike computer is your perfect training partner for indoor and outdoor bike training. Its numerous functions support and guide bikers reliably so that they can have even greater enjoyment of the freedom and delight bicycling provides. The 55-g bike computer wins over customers with its compact, modern design and simple, user-friendly operation. The five large buttons are easily accessible, so the bike computer is extremely easy to use even when you're wearing gloves. Navigation information and ride data can be read very easily on the 1.77-inch transmissive color display thanks to its outstanding contrast. Use the free SIGMA RIDE app to track your current ride data and analyze them at any time. - The bike computer's 150 functions support and guide athletes during training and leisure, delivering all data reliably and in real time - The scope of function includes speed and distance tracking with GPS, barometric altitude measurement and navigation with Track or komoot, and compatibility with e-bikes and smart trainers - The integrated Crash Alert feature uses an app to inform your emergency contacts if you fall off your bike - Smart notifications inform the rider of incoming calls and messages during the ride - Four of up to 20 possible sport profiles are already pre-installed on the ROX 11.1 EVO, and bikers can also create their own sport profile and use the ROX 11.1 on different bikes - Six different training views with one to six data fields can be highlighted in color with the SIGMA RIDE app, with a configuration tailored entirely individually - Up to 100 hours of riding time can be stored on the ROX 11.1 EVO; ride data can thus be called up quickly at any time on the ROX 11.1 EVO, the SIGMA RIDE app or, after training, on your PC or MAC in the SIGMA DATA CENTER - Navigation information and ride data can be read very easily on the 1.77-inch transmissive color display thanks to its outstanding contrast; the display is continuously lit and adjusts automatically to various lighting conditions thanks to its ambient light sensor

Not ready for carbon? The Gossamer Pro Modular AGX+ is a high-end crankset for alloy lovers. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Cold-forged alloy spider - CNC-machined alloy spindle - Chromoly chainring bolts - Q-Factor - 154mm - Chainline - 47mm - BCD - DM/90mm - Chainrings - 46/30T - 656 grams (46/30T x 170mm)

Why We Make This The simple answer is that many contemporary bicycle frame designs call for the headset bearings to ride inside the frame's headtube. After decades of making press-in bearing headsets, we needed to make headsets that worked in these newer frames. From the beginning we understood that integrated headsets posed a unique challenge in that the bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure. That's a problem we know how to solve. Why You Want It Enter, our patented GripLock™ bearing cap. The GripLock™ preloads the headset independently of clamping onto the steerer, so it retains preload far better than the competition and is impervious to the ill effects of load spikes from large hits and heavy braking. This means smoother steering, no more creaking, and a longer lasting headset. Our GripLock™ design also takes the guesswork out of preloading a headset, because the bearing preload force is independent of the clamping force. Our headsets can be preloaded to a torque spec. Compatible with many Specialized mountain bike frames, see headtube specifications here. Not compatible with the 21'-22' Stumpjumper EVO. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - 42mm 45x45 upper bearing for 6.85-7.05mm bearing ream depth. - 52mm 45x45 lower bearing - Compatible with our included baseplate and 45 degree integrated crown races

Ergon ST Core Evo saddle features an ergonomically shaped relief channel to provide comfort over long distances. Twin shell with BASF Infinergy core sandwiched between isolates the rider from the road surface. The Ergonomic core dynamically adapts to pelvic motion providing a floating ride sensation. Gender-specific relief zones accommodate the unique anatomical differences between men and women cyclists 3D damping adapts to pelvic motion with minimal pressure and reduced friction

Ergon ST Core Evo saddle features an ergonomicaly shaped relief channel to provide comfort over long distances. Twin shell with BASF Infinergy core sandwiched between isolates the rider from the road surface. The Ergonomic core dynamically adapts to pelvic motion providing a floating ride sensation. Gender-specific relief zones accommodate the unique anatomical differences between men and women cyclists 3D damping adapts to pelvic motion with minimal pressure and reduced friction

Waste not, want KNØT. Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake. Where it thrives: The open road, up and down hills What it's built for: Aerodynamics, control Highlights: - One-piece looks, two-piece function - Wind tunnel proven, hides cables - Compatible with 2019+SuperSix EVO

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. Features - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Fits Cars CHEVROLET - Spark 5-dr Hatchback with Normal Roof 2013 - 2015 - Spark 5-dr Hatchback with Normal Roof 2016 - 2020

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks